House Painting Shutters

To garner an attractive and much alluring look, instilling shutters can provide an authentic, grandeur look which can attract many onlookers. Typically overlooked, painting a shutter is as vital as it is painting a house as they are the finishing touch of the house exterior. Painting a shutter isn’t the hardest job in the world; there are numerous things that you can do while painting the shutters on your house.

For those who have never painted shutters, painters Longmont gives suggestions below of some quality tips which should be followed while painting shutters on the house.

Choose the paint

For shutters made of wood, regular exterior latex works really well, and for aluminum and vinyl shutters, the paint material should comprise of metal or plastic surfaces. In simple word, use acrylic latex paint for vinyl/aluminum shutters (Sherwin Williams, Behr, Benjamin Moore, and more). The shade of the paint color must not be any darker than the previous one as the heat absorbed by the new darker color can make your house warmer, eventually making the shutter to twist and warp.

Keep your Brush Dry

The first thing that you want to do is to prepare that paint which you want to apply to your shutters. With the help of a 2” – 2½” brush (preferably nylon/polyester), paint the shutters starting from the top. If you want to paint you shutter via brush. We recommend you to keep it dry because if the brush is exceptionally wet, it will eventually result in paint drips and more sticking problems.

Start from the edge

Keep in mind that the painting should start from where the edge of the shutter meets the body of the house as it will help you to decide whether the new color is right or not according to the look of the home. Once confirmed, continue till the all edges around the shutter are complete and then begin painting at the top of the shutter.

Remove the shutter if necessary.

However, the whole process of painting a shutter can also be done by removing the shutters from the house so they can be perfectly cleaned, sanded, and accurately painted on all sides individually. But re-hanging them again on the exact same space on the house is quite challenging because after removing, the shutters don’t always line up exactly the same when placed on a different location. So, do think twice before taking down the shutters and if possible, mark each shutter while removing so that it will be easy for you to place it after painting. We also support you to remove any external hardware/hinges to make the painting process more comfortable. Usually, most shutters contain a minimum of 5 plugs or screws. Here, you have to use the flat head screwdriver and pliers to pull the plugs. Remember, you have to use these same plugs to re-hang the same shutter on the exact same place, so don’t throw them.

Choose your sprayer

It is of considerable significance to choose whether the painting process should be done via a sprayer or brush. A paint sprayer can be rented for about $90/day and is a lot fast when compared to the works of a brush and spraying paints on an object requires practice, but eventually, it produces an even smooth, quality finish which is difficult to achieve on a brush.

Don’t paint on a dry day.

Since most of the shutters are located outside the house, hence painting them on a sunny day can damage/blister the paint, so we recommend you to paint the shutters on a cloudy day preferably having low humidity.

Properly clean the shutter

Before painting the shutters, it is essential to clean them as window shutters procure dirt and mildew. Painting an old shutter without cleaning it can damage the new paint applied too. To clean a shutter, use a mixture of bleach and water in the ratio of 1:4 and spray it using a hose (if mildew exists). While cleaning the shutter, cover your whole body, especially the eyes. After spraying, scrub the shutter with the help of detergent and water to complete the cleaning process. We also recommend you to clean the shutters with trisodium phosphate (TSP) to eradicate any external elements. After cleaning, always sand the rough spots or peeling paint. You can also use a sanding sponge which will help you to scratch up the entire shutter surface, making it easier for the primer/top coat to bond with the surface of the shutter while painting it. We know that it is an extra step, but without a doubt, it will add the extra life to your shutter it needed.

Prime the shutter

It is crucial to keep in mind that always prime the shutters with a latex primer to increase adherence and grip before painting it. NEVER prime the plastic or vinyl surface before painting. There has also been speculation regarding that if the vinyl is in good condition, the use of primer is not necessary which is , and in this case, one can simply peel off old paint via power washing until no loose paint chips are seen after which bonding primer can be sprayed onto the shutters. This primer will help the old paint to adhere to the new paint. One can also prime the shutter, if there is a radical change in the paint color.

If your shutter is extremely damaged/cracked, replacing them will be costly ($40 to $100 each). In this case, painting the shutters are a much cheaper alternative.

Use an airless sprayer for the fastest result

The fastest way to paint a shutter is quite, but it is also useful. Professionals use an airless sprayer to paint shutters which you can rent them from a paint store. The amount of time using the airless sprayer to paint a shutter completely takes less than ten minutes (excluding the dry time between coats). Aerosol spray paint can also be used here, but the use of airless sprayer is a lot faster. Applying two coats are also necessary as it yields the best permanence and color. Also, remember to leave a good deal of time for drying, sanding, and cleaning. Overall, for best results, you can rest a professional quality sprayer.